Fender - Project 8 (G2245703): Installation
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
-
CAUTION: Only tighten the bolt finger-tight at this stage.
- Install the fender.
- Install the upper bolt.
-
CAUTION: Only tighten the bolts finger-tight at this stage.
Install the 5 rear bolts.
-
CAUTION: Only tighten the bolt finger-tight at this stage.
Install the front bolt.
-
CAUTION: Only tighten the bolt finger-tight at this stage.
Install the inner bolt.
- Align the fender.
Refer to: FENDER ALIGNMENT - PROJECT 8 .
- Install the headlamp assembly.
Refer to: Headlamp Assembly article (Removal and Installation).
- Install the fender finisher.
Refer to: FENDER FINISHER - PROJECT 8 (G2260039) .