Oil Cooler (G1557024): Installation

1. CAUTION: Make sure that these components are installed to the noted removal position.
   NOTE: Install new seals.

   Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

   Renew Part: Oil cooler O-ring seals  Quantity: 1  .

2. CAUTION: Make sure that the area around the component is clean and free of foreign material.
   NOTE: Install a new gasket.

   Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

   Renew Part: Oil cooler gasket  Quantity: 1  .

3. CAUTION:

   • Install all the bolts finger tight before final tightening.
   • Make sure that the area around the component is clean and free of foreign material.
   NOTE: Tighten the bolts in the indicated sequence.
   Fig 1: Oil Cooler Tightening Sequence

   Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

To install, reverse the removal procedure.

Torque  : 13 Nm