LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Supercharger Cooling - S/C V6 3.0L Petrol -- XF/(X260) >> Supercharger Cooling - V6 S/C 3.0L Petrol >> Removal And Installation >> Coolant Pump >> Installation

Coolant Pump: Installation

  1. Install the coolant pump.

    Torque  : 9 Nm 

  2. Connect the 2 coolant hoses.
    • Connect the coolant pump electrical connector.
    • Install the 2 wiring harness clips.
  4. Install the left air cleaner outlet pipe.

    Refer to: LEFT AIR CLEANER OUTLET PIPE

  5. Install the left air cleaner.

    Refer to: LEFT AIR CLEANER

  6. Fill the cooling system.

    Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING

  7. Connect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

scientia non olet · About LEMON Manuals