LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Body Panel System - Front End Body Panels -- XF/(X260) >> Front End Body Panels (G1817284) >> Removal And Installation >> Secondary Bulkhead Right Panel - INGENIUM I4 2.0L Petrol (G2020325) >> Removal

Secondary Bulkhead Right Panel - INGENIUM I4 2.0L Petrol (G2020325): Removal

NOTE: This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Disconnect the startup battery ground cable.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT

  2. Remove the engine cover.

    Refer to: ENGINE COVER - INGENIUM I4 2.0L PETROL

  3. Remove the cowl panel.

    Refer to: COWL PANEL 

  4. G11311534Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Remove the four bolts.
    • Remove the engine compartment brace.
  5. G11311535Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
    • Disconnect the 2 electrical connectors.
  6. G11311536Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
scientia non olet · About LEMON Manuals