Stabilizer Bar And Links
NOTE:
Coil spring variant shown below, air spring variant is similar.
| ITEM | DESCRIPTION |
|---|---|
| 1 | Stabilizer bar link |
| 2 | Bush - Bonded to the stabilizer bar |
| 3 | Bracket - Stabilizer bar to rear subframe |
| 4 | Stabilizer bar |
The stabilizer bar is mounted with 2 compression rubber bushes which wind up torsionally in operation. Brackets, which are mounted onto the bushes, are attached to the rear subframe with bolts.
The stabilizer bar links have a ball joint at each end and are fitted with hardened steel washers pressed onto the ball-pins at both ends.