Head Up Display

The Head Up Display (HUD) is controlled from the Instrument Cluster (IC) message center menu.

When selected, the menu offers the following options:

• Select the position of the display on the windscreen.
• Display brightness
• Select which information is displayed on the HUD.

Control of the display brightness can be adjusted in three different ways:

• As listed above, manually, from within the message center menu.
• If the vehicle lighting is switched on, the HUD display adjusts simultaneously with the manual adjustment of the IC panel light dimmer switch.
• Automatic brightness, controlled using data from the forward ambient light sensor, housed in the rain/light sensor.

There is an Automotive Pixel Link 2 (APIX2) between the IC and the HUD to transfer of video data.

For additional information, Refer to: NAVIGATION SYSTEM .

Prior to selecting the HUD windshield position the user should select their desired seating position. The steering wheel switchpack is used to set the horizontal position of the windshield display. Once set, the information can be saved in the seat memory control system, storing the selected preferences.