Pinpoint Test G: Fluid Leakage
- G1: INSPECT CLUTCH MASTER CYLINDER
- Inspect the clutch master cylinder for leakage
Is the clutch master cylinder OK?
Yes
GO to G2
No
Install a new clutch master cylinder
- Inspect the clutch master cylinder for leakage
- G2: INSPECT SYSTEM HYDRAULIC TUBES
- Inspect the clutch hydraulic tubes for loose or damaged fittings causing leakage
Are the clutch hydraulic tubes OK?
Yes
Carry out road test to verify customer complaint
No
Install new components as necessary. Carry out road test
- Inspect the clutch hydraulic tubes for loose or damaged fittings causing leakage