Tie-Rod And Eccentric Bolt
| ITEM | DESCRIPTION |
|---|---|
| 1 | Eccentric bolt |
| 2 | Tie-rod |
| 3 | Link - Lower control arm to wheel knuckle |
Tie-rod
The tie-rod is made from steel. The tie-rod has a bush pressed into a machined bore on the inner end.
The bush is secured with a special eccentric bolt, a washer and a nut. The eccentric bolt allows for the adjustment of the rear toe. The rotation of the bolt moves the eccentric head within a recessed slot in the bracket, allowing the toe to be adjusted within the set limits.