LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> F-Pace Base >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling - INGENIUM I4 2.0L Petrol -- F-Pace (X761) >> Engine Cooling - INGENIUM I4 2.0L Petrol (G2006213) >> Removal And Installation >> Auxiliary Coolant Pump (G2034835) >> Installation

Auxiliary Coolant Pump (G2034835): Installation

  1. NOTE: Only carry out this step if previously removed.

    Install the auxiliary coolant pump to the mounting bracket.

  2. Install the auxiliary coolant pump mounting bracket.
  3. Connect the electrical connector.
  4. Connect the 2 coolant hoses.
  5. Secure the coolant valve assembly.
  6. Fill and bleed the cooling system.

    Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING .

scientia non olet · About LEMON Manuals