LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> F-Pace Base >> Repair and Diagnosis >> Brakes >> Parking Brake System >> Parking Brake And Actuation -- F-Pace (X761) >> Parking Brake And Actuation (G1822069) >> General Procedures >> Electric Park Brake Release When The Vehicle Has No Electrical Power (G1822068) >> Activation

Electric Park Brake Release When The Vehicle Has No Electrical Power (G1822068): Activation

    • Install a new O-ring seal.

      Renew Part: Electric park brake actuator O-ring seal and bolt kit Quantity: 2  .

    • Install the EPB actuator to the brake caliper.
    • Install and tighten the 2 new bolts.

      Torque: 8 Nm 

    • Connect the electrical connector.
  2. Install the rear wheels and tires.

    Refer to: WHEEL AND TIRE - INGENIUM I4 2.0L DIESEL/INGENIUM I4 2.0L PETROL/TDV6 3.0L DIESEL/V6 S/C 3.0L RETROL (G1967109)

  3. Repeat the above procedure for the other side.
  4. Connect the 12 V system.

    Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .

scientia non olet · About LEMON Manuals