Brake Vacuum Pump - INGENIUM I4 2.0L Diesel (G1817249): Removal

NOTE:

Removal steps in this procedure may contain installation details.
The brake vacuum pump is an integral component of the engine oil pump and cannot be serviced separately.

Disconnect the battery ground cable.
Refer to: STARTUP BATTERY DISCONNECT AND CONNECT .
WARNING: Make sure to support the vehicle with axle stands.

Raise and support the vehicle.
Refer to: OIL PUMP CHAIN .
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Torque: 25 Nm
NOTE: Do not disassemble further if the component is removed for access only.

Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Torque: 12 Nm