Rear Stabilizer Bar Link (G2187516): Installation

CAUTION:
- Make sure that new nuts are installed.
- Use an Allen key to prevent the ball joint rotating whilst removing the nut.
- Install the stabilizer bar link.
- Install and tighten the 2 nuts.
  Renew Part: Stabilizer bar link retaining nut(s) Quantity: 2 .
  
  Torque : 70 Nm
- Install the rear brake disc shield.
- Install and tighten the 3 bolts.
  Torque : 9 Nm
Install the rear brake disc.
Refer to: BRAKE DISC .