LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> E-Pace Base >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation -- E-Pace/X540 >> Hydraulic Brake Actuation (G1785120) >> Removal And Installation >> Brake Pedal And Bracket (G2172298) >> Installation

Brake Pedal And Bracket (G2172298): Installation

  1. Install the brake pedal switch.
  2. CAUTION: Make sure that a new brake pedal plastic pin is installed.

    Install the brake pedal assembly.

    Renew Part: Brake booster to brake pedal pin Quantity: 1  .

    Torque  : 25 Nm 

  3. Connect and secure the wiring harness.
  4. Install the accelerator pedal.

    Refer to: ACCELERATOR PEDAL .

  5. Install the instrument panel lower trim panel.

    Refer to: INSTRUMENT PANEL LOWER TRIM PANEL .

scientia non olet · About LEMON Manuals