DTC P2610-84: ECM/PCM Engine Off Timer Performance - Signal below allowable range: Action
WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Vehicle Conditions to enable DTC Logging Strategy
- Ignition On, Engine running
- Check powertrain control module for additional DTCs and refer to relevant DTC index. Rectify these first
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Refer to the electrical circuit diagrams and check the power and ground connections to the module
- Refer to the electrical circuit diagrams and check connections are secure and wiring integrity for coolant temperature sensor and ambient temperature sensor
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest