LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2018 >> F-Pace Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 251 (Transmission/Transaxle Cooling - V6 S/C 3.0L Petrol , Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD -- XE (X760)) >> Transmission/Transaxle Cooling - V6 S/C 3.0L Petrol, Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD >> Transmission Fluid Cooler (G1862910) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
  • Before disconnecting any components, make sure the area is clean and free from foreign material. When disconnected all openings must be sealed.
  • Be prepared to collect escaping fluids.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some variation in the illustrations may occur, but the essential information is always correct.
  1. Refer to: Transmission Fluid Drain And Refill (G1867746) .
  2. Refer to: Cooling System Draining and Vacuum Filling .
  3. G11291683
  4. G11291684
  5. G11291685
  6. G11291686
G11291687

Torque Specification: 5 Nm 

scientia non olet · About LEMON Manuals