Fuel Charging And Controls - Turbocharger - INGENIUM I4 2.0L Petrol: Specifications
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Description - Low/Mid Power | Nm | lb-ft |
| Diesel particulate filter | 10 | 7 |
| Turbocharger oil return pipe | 10 | 7.4 |
| Turbocharger oil supply pipe banjo bolt | 18 | 13 |
| Turbocharger heat shield bolts | 8 | 7 |
| Turbocharger fixing nuts to exhaust manifold | 28 | 21 |
| Turbocharger outlet pipe | 9 | 7 |
TORQUE SPECIFICATIONS
| Description - High Power | Nm | lb-ft |
| Low pressure turbocharger to high pressure turbocharger retaining bolts | 27 | 20 |
| Turbocharger set to cylinder head retaining bolts** | ||
| Stage 1 | 15 | 11 |
| Stage 2 | 28 | 21 |
| High pressure turbocharger to exhaust manifold retaining bolts** | 28 | 21 |
| Low pressure/high pressure turbocharger heat shield bolts | 9 | 7 |
| Low pressure turbocharger oil return pipe bolt | 11 | 8 |
| Low pressure turbocharger oil return pipe mounting bolt | 10 | 7 |
| High pressure turbocharger oil return pipe bolt | 11 | 8 |
| Low pressure turbocharger oil feed pipe to turbocharger banjo bolt* | 18 | 13 |
| Low pressure turbocharger oil feed pipe to oil filter housing banjo bolt* | 18 | 13 |
| High pressure turbocharger oil feed pipe to turbocharger banjo bolt* | 18 | 13 |
| High pressure turbocharger oil feed pipe to oil filter housing banjo bolt* | 18 | 13 |
| Low pressure/high pressure turbocharger outlet pipe | 9 | 7 |
| High pressure turbocharger mounting bracket M8 retaining bolts | 25 | 18 |
| High pressure turbocharger mounting bracket M6 retaining bolts | 10 | 7 |
* New bolts must be installed.
** New bolts and spacers must be installed.