LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2018 >> F-Pace Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Transfer Case - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD -- XE (X760)) >> Transfer Case - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD >> Transfer Case Fluid Level Check (G1908026) >> General Procedures >> Adjustment

General Procedures: Adjustment

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Some components shown removed for clarity.
  • Removal steps in this procedure may contain installation details.
  1. Top-up the transfer case with recommended fluid, until the fluid is level with bottom of filler/level plug hole.
  2. CAUTION: Make sure that a new sealing washer is installed.
    NOTE: Make sure that all the component mating faces are clean.
    G11314248

    Torque Specification  : 8 Nm 

  3. CAUTION: Make sure that the area around the component is clean and free of foreign material.
    G11314247

    Torque Specification  : 25 Nm 

  4. G11314245

    Torque Specification  : 25 Nm 

  5. G11314251

    Torque Specification  : 45 Nm 

  6. Refer to: Air Deflector .
scientia non olet · About LEMON Manuals