LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2018 >> F-Pace Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 216 (Transfer Case - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD -- XE (X760)) >> Transfer Case - Vehicles With: 8HP70 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission AWD/8HP45 8-Speed Automatic Transmission RWD >> Transfer Case Connecting Sleeve Seals >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11314292

    Using the special tool, install a new input shaft seal.

    Special Tool(s):  307-520, JLR-307-694

  2. NOTE: If equipped.
    G11314275

    A new breather vent must always be installed.

    Renew Part: Breather. 

  3. Install the transfer case assembly.

    Refer to: Transfer Case - V6 S/C 3.0L Petrol/INGENIUM I4 2.0L Diesel .

scientia non olet · About LEMON Manuals