LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2018 >> F-Pace Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 210 (Engine Cooling - V6 S/C 3.0L Petrol -- XE (X760)) >> Engine Cooling - V6 S/C 3.0L Petrol >> Electric Thermostat >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the electric thermostat.
  2. Install the bolt.

    Torque Specification: 9 Nm 

  3. Install the 2 coolant pipes.
  4. Connect the electrical connectors.
  5. Connect the 2 coolant pipes.
  6. Install the air cleaner.

    Refer to: Left Air Cleaner .

  7. Install the Air cleaner outlet pipe.

    Refer to: Left Air Cleaner Outlet Pipe .

  8. Install the air cleaner pipe connector.

    Refer to: Air Cleaner Outlet Pipe T-Connector .

  9. Fill the cooling system.

    Refer to: Cooling System Draining and Vacuum Filling .