LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2018 >> F-Pace Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Engine Cooling - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Engine Cooling - INGENIUM I4 2.0L Petrol >> Thermostat Housing (G1998228) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
    • Install the thermostat housing.

    Torque Specification: 12 Nm 

  2. Connect the electrical connectors
    • Connect the coolant bypass hose to the thermostat housing.

    Torque Specification: 7 Nm 

  4. Connect the coolant outlet hose to the thermostat housing.
  5. Connect the coolant hoses.
  6. Install the NVH pad.
  7. Fill the cooling system.

    Refer to: Cooling System Draining, Filling and Bleeding .

  8. Install the engine cover.

Refer to: Engine Cover - Ingenium I4 2.0L Petrol .

scientia non olet · About LEMON Manuals