LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2018 >> F-Pace Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 180 (Hydraulic Brake Actuation -- XE (X760)) >> Hydraulic Brake Actuation >> Brake Pedal And Bracket - Vehicles With: Automatic Transmission (G1851889) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION:
    • Make sure that new brake pedal plastic pin has been installed.
    • The brake pedal MUST NOT be depressed when installing the stoplamp switch. Failure to follow this instruction will result in damage to the stoplamp switch.
    • Make sure that excessive force is not used when installing the stoplamp switch. Failure to follow this instruction may result in damage to the stoplamp switch.

To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals