LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Electronic Engine Controls - V8 N/A 5.0L Petrol -- XJ/X351) >> Removal And Installation >> Engine Oil Level Sensor (G1269274) >> Removal

Engine Oil Level Sensor (G1269274): Removal

WARNING: This page is about a different car, the 2013 Jaguar XJ, 2012 Jaguar XJ, 2011 Jaguar XJ, and 2010 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to ENGINE OIL DRAINING AND FILLING .
  3. CAUTION:
    • Be prepared to collect escaping fluids.
    • Before the disconnection or removal of any components, make sure the area around joint faces and connections are clean. Plug any open connections to prevent contamination.
    G11285164

    Torque Specification  : 12 Nm 

scientia non olet · About LEMON Manuals