LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Electronic Engine Controls - V8 N/A 5.0L Petrol -- XJ/X351) >> Removal And Installation >> Engine Control Module (ECM) (G1269272) >> Removal

Engine Control Module (ECM) (G1269272): Removal

WARNING: This page is about a different car, the 2013 Jaguar XJ, 2012 Jaguar XJ, 2011 Jaguar XJ, and 2010 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.

All vehicles 

  1. Refer to BATTERY DISCONNECT AND CONNECT (General Procedures).
  2. Refer to COWL VENT SCREEN (Removal and Installation).
  3. CAUTION: RH illustration shown, LH is similar.
    G11284561

    Torque Specification  : 7 Nm 

  4. CAUTION: Before disconnecting or removing components, ensure the area around the joint faces and connections are clean. Plug open connections to prevent contamination.
    NOTE: LH illustration shown, RH is similar.
    G11284562

Left-hand drive vehicles 

  1. G11293298

    Torque Specification  : 7 Nm 

Right-hand drive vehicles 

  1. G11293299

    Torque Specification  : 7 Nm 

  2. G11293300

    Torque Specification  : 7 Nm 

scientia non olet · About LEMON Manuals