LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Electronic Engine Controls - V8 N/A 5.0L Petrol -- XJ/X351) >> Removal And Installation >> Camshaft Position (CMP) Sensor RH (G1269251) >> Installation

Camshaft Position (CMP) Sensor RH (G1269251): Installation

WARNING: This page is about a different car, the 2013 Jaguar XJ, 2012 Jaguar XJ, 2011 Jaguar XJ, and 2010 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION:
    • Make sure that the mating faces are clean and free of foreign material.
    • Make sure that the sensor tip is clean and free of foreign material.
    NOTE: Lubricate the O-ring seal with clean engine oil.

    To install, reverse the removal procedure.

scientia non olet · About LEMON Manuals