LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine - V8 N/A 5.0L Petrol -- XJ/X351) >> Engine - V8 5.0L Petrol >> Removal And Installation >> Timing Cover (G1271903) >> Removal

Timing Cover (G1271903): Removal

WARNING: This page is about a different car, the 2013 Jaguar XJ, 2012 Jaguar XJ, 2011 Jaguar XJ, and 2010 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some illustrations may show the engine removed for clarity.
  • Some variation in the illustrations may occur, but the essential information is always correct.
  1. Disconnect the battery ground cable.

    Refer to: BATTERY DISCONNECT AND CONNECT .

  2. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  3. Refer to: CRANKSHAFT PULLEY (G1785731) .
  4. Refer to: VALVE COVER LH (G1271906) .
  5. Refer to: VALVE COVER RH (G1271907) .
  6. Refer to: COOLING SYSTEM PARTIAL DRAINING AND VACUUM FILLING (G1816935) .
  7. G11285233
  8. CAUTION: Be prepared to collect escaping coolant.
    G11284660
  9. G11285235
  10. G11285236
  11. G11285237
  12. G11284665
  13. G11285239
  14. G11285240
G11285241
scientia non olet · About LEMON Manuals