LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine - V8 N/A 5.0L Petrol -- XJ/X351) >> Engine - V8 5.0L Petrol >> Removal And Installation >> Oil Pump (G1271902) >> Installation

Oil Pump (G1271902): Installation

WARNING: This page is about a different car, the 2013 Jaguar XJ, 2012 Jaguar XJ, 2011 Jaguar XJ, and 2010 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11285222

    Lubricate and install the new O-ring seals.

  2. G11285224

    Torque Specifications: 

    M8 25 Nm 

    M6 12 Nm 

  3. G11285225

    Lubricate and install a new O-ring seal.

  4. G11285226

    Torque Specifications: 12 Nm 

  5. G11285219

    Torque Specifications: 21 Nm 

  6. NOTE: Tsubaki timing drive only.
    G11285228

    Install the lower timing chain making sure the coloured chain links align correctly with the fuel rail high-pressure fuel pumps camshaft and crankshaft sprocket markings.

  7. CAUTION: Make sure that the tensioner spring is correctly located.
    NOTE: Tsubaki timing drive only.
    G11285217

    Torque Specifications: 21 Nm 

  8. NOTE: INA timing drive only.
    G11285230

    Install the lower timing chain making sure the coloured chain links align correctly with the fuel rail high-pressure fuel pumps camshaft and crankshaft sprocket markings.

  9. CAUTION: Make sure that the tensioner spring is correctly located.
    NOTE: INA timing drive only.
    G11285218

    Torque Specifications: 21 Nm 

  10. Refer to: OIL PAN EXTENSION (G1271901) .
  11. Refer to: Battery Disconnect and Connect .
scientia non olet · About LEMON Manuals