Oil Pan (G1271900): Installation

WARNING: This page is about a different car, the 2013 Jaguar XJ, 2012 Jaguar XJ, 2011 Jaguar XJ, and 2010 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:
- Use only a plastic scraper when removing the sealing material.
- Use lint free cloth.
- Make sure that the mating faces are clean and free of corrosion and foreign material.
- Apply RTV sealant WSE-M4G323-A6 (Loctite 5901G or Loctite 5900) to the areas shown, and tighten the bolts within 7 minutes.
- Apply a bead of sealant, 2.5 mm diameter, to the area indicated.
CAUTION: Tighten the bolts in the sequence shown.

Fig 1: Oil Pan Bolts Tightening Sequence
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

Torque Specifications: 12 Nm
Refer to: ENGINE OIL LEVEL SENSOR (G1269274) .
Refer to: BATTERY DISCONNECT AND CONNECT .