Oil Cooler (G1271898): Installation

WARNING: This page is about a different car, the 2013 Jaguar XJ, 2012 Jaguar XJ, 2011 Jaguar XJ, and 2010 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:
- Install all the bolts finger tight before final tightening.
- Make sure that the area around the component is clean and free of foreign material.
- Install the new seals.
NOTE: Tighten the bolts in the indicated sequence.

Fig 1: Oil Cooler Bolts Tightening Sequence
Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

To install, reverse the removal procedure.