Engine Mount RH (G1271918): Removal

WARNING: This page is about a different car, the 2013 Jaguar XJ, 2012 Jaguar XJ, 2011 Jaguar XJ, and 2010 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Removal steps in this procedure may contain installation details.
Some variation in the illustrations may occur, but the essential information is always correct.
Some illustrations may show the engine removed for clarity.

All vehicles

Refer to: AIR CONDITIONING (A/C) SYSTEM RECOVERY, EVACUATION AND CHARGING .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on safety stands.

Raise and support the vehicle.
Refer to: Air Deflector .
Right-hand drive vehicles
NOTE: Note the fitted position.
- Support and release the power steering rack.
All vehicles
CAUTION: Support the engine on a jack. The angle may need to be adjusted during this procedure.

Support the engine with the lifting equipment.
- Remove and discard the nut.
NOTE: Do not disassemble further if the component is removed for access only.
- Remove and discard the nut.