Engine Mount RH (G1271918): Installation
WARNING: This page is about a different car, the 2013 Jaguar XJ, 2012 Jaguar XJ, 2011 Jaguar XJ, and 2010 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
All vehicles
- Install a new nut and tighten to 48 Nm.
Torque Specifications: 48 Nm
- Torque Specifications: 63 Nm
- Install a new locknut.
Right-hand drive vehicles
Torque Specifications: 100 Nm
-
NOTE: Make sure that this component is installed to the noted removal position.
- Torque Specifications: 35 Nm
All vehicles
- Refer to: Air Deflector .
- Lower the vehicle on the lift.
- Refer to: BATTERY DISCONNECT AND CONNECT .