LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Cooling - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine Cooling - V6 S/C 3.0L Petrol >> Removal And Installation >> Thermostat Housing (G1557005) >> Removal

Thermostat Housing (G1557005): Removal

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: COOLING SYSTEM DRAINING AND VACUUM FILLING 
  3. Refer to: Air Cleaner Outlet Pipe T-Connector (Removal and Installation)..

  4. Refer to: Air Cleaner Outlet Pipe LH (Removal and Installation)..
  5. Refer to: Air Cleaner LH (Removal and Installation)..
  6. NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
    G11287876
  7. NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
    G11285417
  8. NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
    G11287878

    Torque Specification: 10 Nm 

  9. NOTE:
    • Some variation in the illustrations may occur, but the essential information is always correct.
    • The retaining clips cannot be removed from the pipe.
    G11284662
scientia non olet · About LEMON Manuals