LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Cooling - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine Cooling - V6 S/C 3.0L Petrol >> General Procedures >> Cooling System Partial Draining, Filling And Bleeding (G1556999) >> Draining

Cooling System Partial Draining, Filling And Bleeding (G1556999): Draining

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: Radiator Splash Shield (Removal and Installation).
  3. WARNING:
    • Release the cooling system pressure by slowly turning the coolant expansion tank cap a quarter of a turn. Cover the expansion tank cap with a thick cloth to prevent the possibility of scalding. Failure to follow this instruction may result in personal injury.
    • Be prepared to collect escaping fluid.
    CAUTION: Since injury such as scalding could be caused by escaping steam or coolant, make sure the vehicle cooling system is cool prior to carrying out this procedure.
    G11287763
  4. CAUTION: Be prepared to collect escaping fluids.
    G11287764
  5. G11287765

    Torque Specification: 2 Nm 

scientia non olet · About LEMON Manuals