LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Cooling - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine Cooling - V6 S/C 3.0L Petrol >> Diagnosis And Testing >> Inspection And Verification >> Visual Inspection

Visual Inspection

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify the customer concern.
  2. Visually inspect for obvious signs of damage and system integrity.

    Visual Inspection 

    MECHANICAL ELECTRICAL
    • Coolant leaks
    • Coolant hoses
    • Coolant expansion tank
    • Coolant expansion tank cap
    • Radiator
    • Heater core
    • Accessory drive belt
    • Cooling fan
    • Fuses
    • Wiring harnesses and connectors
    • Powertrain control module
    • Engine coolant temperature sensor
    • Radiator outlet temperature sensor
    • Cooling fan
  3. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step.
  4. If the cause is not visually evident, verify the symptom and refer to the SYMPTOM CHART , alternatively check for Diagnostic Trouble Codes (DTCs) and refer to the DTC INDEX .
  5. Check DDW for open campaigns. Refer to the corresponding bulletins and SSMs which may be valid for the specific customer complaint and carry out the recommendations as required.