P0336-03 - Crankshaft Position Sensor A Circuit Range/Performance - FM (Frequency Modulated)/PWM (Pulse Width Modulated) failures: Action
WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to applicable SYSTEM WIRING DIAGRAMS and check the crankshaft position sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Check crankshaft position sensor air gap to target rotor is correct
- Check and install a new crankshaft position sensor as required