Possible Causes
WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Monitor description . To diagnose a failure on the signal line to the fuel pump driver module
- This DTC is set when the powertrain control module has determined an open circuit via lack of bias voltage, low current flow, no change in the state of an input in response to an output.
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Fuel pump driver module circuit, open circuit, high resistance