LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Exhaust System - V6 S/C 3.0L Petrol -- XJ/X351) >> Exhaust System - V6 S/C 3.0L Petrol >> Removal And Installation >> Catalytic Converter RH (G1551298) >> Removal

Catalytic Converter RH (G1551298): Removal

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Observe due care when working near a hot exhaust system.
NOTE: Removal steps in this procedure may contain installation details.

All vehicles 

  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: Air Deflector .
  3. G11292558

    Torque Specification: 40 Nm 

2WD vehicles 

  1. G11292249
  2. G11292560

4WD vehicles 

  1. G11292561
  2. G11292562
  3. G11292488
G11292564

All vehicles 

  1. NOTE: Install new clamp.
    G11292565

    Torque Specification: 55 Nm 

  2. NOTE: Do not disassemble further if the component is removed for access only.
    G11292566

    Special Tool(s):  310-121

    Torque Specification: 48 Nm 

scientia non olet · About LEMON Manuals