LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Exhaust System - V6 S/C 3.0L Petrol -- XJ/X351) >> Exhaust System - V6 S/C 3.0L Petrol >> Removal And Installation >> Catalytic Converter LH - AWD (G1576764) >> Removal

Catalytic Converter LH - AWD (G1576764): Removal

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Observe due care when working near a hot exhaust system.
NOTE: Removal steps in this procedure may contain installation details.

All vehicles 

  1. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  2. Refer to: Air Deflector .
  3. G11292540

    Torque Specification: 40 Nm 

2WD vehicles 

  1. G11291965
  2. G11292542

4WD vehicles 

  1. G11292543
  2. G11292488
  3. G11292545

All vehicles 

  1. NOTE: Install new clamp.
    G11292555

    Torque Specification: 55 Nm 

  2. NOTE: Do not disassemble further if the component is removed for access only.
    G11292547

    Special Tool(s):  310-121

    Torque Specifications: 

    HO2S sensor 48 Nm 

    Damper 18 Nm 

scientia non olet · About LEMON Manuals