LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine - V6 S/C 3.0L Petrol >> Timing Drive Components (G1557030) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Check all timing components for wear and install new components if required.
NOTE:
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Some illustrations may show the engine removed for clarity.
  1. Refer to: BATTERY DISCONNECT AND CONNECT .
  2. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  3. Refer to: TIMING COVER (G1780790) .
  4. G11285263
  5. CAUTION: Only rotate the crankshaft clockwise.
    G11285264

    Install the special tool.

    Special Tool(s):  JLR-303-1303

  6. G11285265
  7. G11285266
  8. G11285267
  9. CAUTION: If the variable valve timing (VVT) units are knocked or dropped then the VVT must be replaced.
    G11285268

    Remove the timing chain with the VVT units.

  10. G11285269
  11. G11285270
  12. G11285271
  13. CAUTION: If the VVT is knocked or dropped then the VVT must be replaced.
    G11285272

    Remove the timing chain with the VVT units.

  14. G11285273
  15. CAUTION: Discard the friction washer.
    G11285274
scientia non olet · About LEMON Manuals