LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Engine - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine - V6 S/C 3.0L Petrol >> Timing Cover (G1780790) >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some variation in the illustrations may occur, but the essential information is always correct.
  • Some illustrations may show the engine removed for clarity.
  1. Refer to: BATTERY DISCONNECT AND CONNECT .
  2. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  3. Refer to: ACCESSORY DRIVE BELT (G1549995) .
  4. Refer to: ACCESSORY DRIVE BELT TENSIONER (G1549997) .
  5. Refer to: THERMOSTAT HOUSING (G1557005) .

    Refer to: ELECTRIC THERMOSTAT (G1772758) .

  6. Refer to: VALVE COVER LH (G1557032) .
  7. Refer to: VALVE COVER RH (G1557033) .
  8. .: CRANKSHAFT PULLEY (G1851000) .
  9. G11285239
  10. G11285240
  11. G11284665
G11285241
scientia non olet · About LEMON Manuals