LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Ignition - V6 S/C 3.0L Petrol -- XJ/X351) >> Engine Ignition - V6 S/C 3.0L Petrol >> Removal And Installation >> Ignition Coil-On-Plug (G1551319) >> Removal

Ignition Coil-On-Plug (G1551319): Removal

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • Removal steps in this procedure may contain installation details.
  • Some variation in the illustrations may occur, but the essential information is always correct.
  1. Refer to: Engine Cover - V8 5.0L Petrol/V8 S/C 5.0L Petrol (Iterior Trim and Ornamentation, Removal and Installation).
  2. G11293844
  3. G11293845

    Torque Specification: 7 Nm 

  4. G11293846
  5. G11293847
  6. NOTE: LH illustration shown, RH is similar.
    G11293845

    Torque Specification: 7 Nm 

  7. NOTE:
    • The step must be carried out on both sides.
    • LH illustration shown, RH is similar.
    G11293849

    Torque Specification: 20 Nm 

scientia non olet · About LEMON Manuals