Selector Shaft Seal (G1580137): Removal
WARNING: This page is about a different car, the 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
- Refer to: Front Driveshaft - AWD (205-01, Removal and Installation).
-
CAUTION:
- Before the disconnection or removal of any components, make sure the area around joint faces and connections are clean. Plug any open connections to prevent contamination.
- Discard the seal.
Special Tool(s): 307-509-1, 307-509-2