LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Automatic Transmission/Transaxle - RWD -- XJ/X351) >> Automatic Transmission/Transaxle - Vehicles With: 8HP70 8-Speed Automatic Transmission RWD >> Removal And Installation (Transmission Related Components) >> Input Shaft Seal (G1571595) >> Removal

Input Shaft Seal (G1571595): Removal

WARNING: This page is about a different car, the 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Battery Disconnect and Connect (General Procedures).
  2. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  3. Refer to: TRANSMISSION - V6 3.0L PETROL (G1373027) , TRANSMISSION - V6 S/C 3.0L PETROL/V8 5.0L PETROL/V8 S/C 5.0L PETROL (G1551362)  and TRANSMISSION - V8 5.0L PETROL/V8 S/C 5.0L PETROL (G1271948)  (Removal).
  4. G11291629

    Special Tool(s):  307-613

  5. CAUTION:
    • Take extra care not to damage the edges of the component.
    • Discard the seal.
    G11291630

    Special Tool(s):  100-012, 100-012-01, 308-375

scientia non olet · About LEMON Manuals