Selector Shaft Seal (G1580137): Removal
WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
- Refer to: Front Driveshaft - AWD (Removal and Installation).
-
CAUTION:
- Before the disconnection or removal of any components, make sure the area around joint faces and connections are clean. Plug any open connections to prevent contamination.
- Discard the seal.
Special Tool(s): 307-509-1, 307-509-2