LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Automatic Transmission/Transaxle - AWD -- XJ/X351) >> Removal And Installation >> Input Shaft Seal (G1551379) >> Installation

Input Shaft Seal (G1551379): Installation

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
  1. CAUTION:
    • Install a new seal.
    • Care must be taken to avoid damage to the seal register and running surface.
    G11291831

    Special Tool(s):  JLR-308-845

  2. G11291832

    Special Tool(s):  307-613

  3. CAUTION: Make sure the torque converter is fully located into the oil pump drive.
    G11291833
  4. Refer to: TRANSMISSION INSTALLATION (G1551386)  .
  5. Refer to: Battery Disconnect and Connect (General Procedures).
scientia non olet · About LEMON Manuals