Description And Operation: Overview
WARNING: This page is about a different car, the 2013 Jaguar XJ, 2012 Jaguar XJ, 2011 Jaguar XJ, and 2010 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.
The fuel charging and controls system is a gasoline DI (direct injection) system controlled by the ECM (Engine Control Module).
The fuel charging and controls system consists of:
- LP (Low Pressure) and HP (High Pressure) fuel lines.
- Two HP fuel pumps.
- Two fuel rails and a crossover tube.
- A FRPT (Fuel Rail Pressure and Temperature) sensor.
- Eight fuel injectors.
LP fuel from the pump in the fuel tank is pressurized by the HP fuel pumps and supplied to the fuel injectors via the fuel rails and crossover tube. The ECM controls the fuel injectors and HP fuel pumps to inject the required volume of fuel into the combustion chambers.