LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Accessory Drive - V6 S/C 3.0L Petrol -- XJ/X351) >> Accessory Drive - V6 S/C 3.0L Petrol >> Description And Operation >> Accessory Drive - Overview (G1816946) >> Belt TENSIONERS

Belt TENSIONERS

WARNING: This page is about a different car, the 2017 Jaguar XJ, 2016 Jaguar XJ, 2015 Jaguar XJ, 2014 Jaguar XJ, and 2013 Jaguar XJ. However, it is still accessible from the selected car via links, so may be relevant.

Each belt tensioner consists of an idler pulley on the end of a spring loaded pivot arm. The pivot arms can be turned manually for removal and installation of the drive belts.

Each belt tensioner is calibrated to automatically maintain the correct tension of the related drive belts.

The belt tensioner also provides the means to remove and install the drive belt. When the belt tensioner is rotated with a wrench against its spring to the end-stop, two holes align between the arm and the case that allow the tensioner to be pinned in the "install" position. The pin should only be removed when using the wrench to back the tensioner off. Pulling the pin without using a wrench can damage the tensioner itself and/or the belt.

scientia non olet · About LEMON Manuals