LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> XJR L >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake Actuation -- XJ/X351 >> Hydraulic Brake Actuation >> Removal And Installation >> Brake Master Cylinder (G1268356) >> Installation

Brake Master Cylinder (G1268356): Installation

  1. CAUTION: Make sure the master cylinder is correctly aligned. Failure to make sure the master cylinder is correctly aligned to the brake booster actuation rod may cause component damage or poor brake performance.
    G11284525

    Install new brake fluid reservoir seals.

    Install a new O-ring seal.

  2. To install, reverse the removal procedure.
  3. For additional information, refer to: Brake System Bleeding (General Procedures).
scientia non olet · About LEMON Manuals