LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> F-Pace S >> Repair and Diagnosis >> External Pages >> Different car >> Section 193 (Engine Cooling - INGENIUM I4 2.0L Petrol -- XE (X760)) >> Engine Cooling - INGENIUM I4 2.0L Petrol >> Auxiliary Coolant Pump (G2034835) >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Only carry out this step if previously removed.

    Install the auxiliary coolant pump to the mounting bracket.

  2. Install the auxiliary coolant pump mounting bracket.
  3. Connect the electrical connector.
  4. Connect the 2 coolant hoses.
  5. Secure the coolant valve assembly.
  6. Fill and bleed the cooling system.

Refer to: Cooling System Partial Draining and Vacuum Filling .

scientia non olet · About LEMON Manuals