Rear Section
WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
The rear section is divided into right side and left side rear silencer assemblies.
Each rear silencer has an inlet pipe and an outlet pipe. Each outlet pipe is fitted with a stainless steel finisher.
Each rear silencer inlet pipe is secured to the center section outlet pipe by a clamp.
Each rear silencer is supported by two rubber mountings; one is attached to a mounting welded on the side of the rear subframe and the other is attached to a bracket bolted to the vehicle body.
Each rear silencer has a mass damper fitted.