LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2017 >> F-Pace S >> Repair and Diagnosis >> External Pages >> Different car >> Section 167 (Engine Ignition - V6 S/C 3.0L Petrol -- XE (X760)) >> Engine Ignition - V6 S/C 3.0L Petrol >> Spark Plugs >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. G11307691

    Torque Specification: 20 Nm 

  2. G11307690

    Torque Specification: 7 Nm 

  3. G11307689
  4. G11308064
  5. G11308063
  6. G11069565

    Torque Specification: 20 Nm 

  7. G11308062

    Torque Specification: 7 Nm 

  8. G11308061
  9. CAUTION: To prevent contamination, make sure to install the oil filler cap after removing the sound proofing pad.
    G11308060
  10. G11308059
  11. Install the engine cover.

    Refer to: Engine Cover - V6 S/C 3.0L Petrol .

  12. Connect the startup battery ground cable.

    Refer to: Battery Disconnect and Connect .

scientia non olet · About LEMON Manuals